Introduction
Ionic air purifiers hold the promise of clean air, purified of all known harmful contaminants that threaten our health. These harmful contaminants are not visible to our naked eyes. The weapons against such are very likely to be invisible to our eyes as well. I am drawn to this intuitive logic. Sadly, google has no quick answer to meet my simple expectation. Instead, controversy abounds. It is quite clear that the urge to rush out and buy an ionic air purifier must be suppressed at the moment. Safety, more than effectiveness, must be given higher weightage in the selection of an ionic air purifier.
The recent China melamine saga that killed infants also is a timely reminder to us that in buying into any technology or any product, all claims by manufacturers and distributors must be examined to the fullest extent that our resources permit. This is especially so where the key reactive agent is invisible to the naked eye. Investigating ionic air purifier technologies falls within this ambit as the reactive agents are invisible ions.
In this article, I am laying out the roadmap as I look into the existing ionic air purifier technologies in the global marketplace. Trying to understand the science behind the technologies seems to be the logical place to begin searching for the ideal ionic air purifier. The creation of a powerful invisible defence shield against airborne molecular contaminants is increasingly taking centrestage. The prime threat being closely monitored by scientists all over the world is the avian flu virus.
Types of Ionic Air Purifier Technologies
Broadly speaking, air purification technologies can be deployed in either passive or active modes. Passive typically means that impure air is drawn into the air purifier for the reactive agents to work on before re-emerging as cleaned air into the environment. Active generally means dispersive processes by which the impure air is penetrated and purified by the reactive agents. Combinations of both passive and active modes are often found in many types of ionic air purifiers.
In the global market today, ionic air purifier technologies include the following categories:
(A) Ion generator - positive and negative ions
(B) Ion generator - negative ions only
(C) Photocatalytic Oxidation (POC)
(D) Electrostatic filter
(E) Combos
Ion Generator - Positive and Negative Ions
This combination of positive and negative ions appears to show the most promise for the future of ionic air purifier technology. Pioneered by the Japanese corporate giant, Sharp Corporation, they are known as plasmacluster ions.
Sharp explains that the plasmacluster of positive and negative ions clump to harmful airborne bacteria and viruses. When this happens, hydroxyl is produced. Known as nature's detergent, hydroxyl is a powerful reactive species that plucks out hydrogen molecules from the organic structure of these airborne particulates, thereby killing them. The by-products of this chemical reaction, mainly water, are harmless.
This technology uses a differential ion generator, comprising a positive and a negative ion generator which can be powered in alternate cycles to control the type of ions generated.
Advocates of the positive and negative ions combination claim that a balance of both these ion types is to be found in places like waterfalls and pristine forests, i.e. this is the real state of the natural environment. Diametrically, believers of the negative ions technology take the view that negative ions dominate the space in natural habitats and that positive ions are actually harmful. As I progress with my research, I shall be looking for independent scientific studies that support either of these two opposing views.
Ion Generator - Negative Ions
The traditional ionic air purifier produces only negative ions. This method seems to dominate market share in the industry but is coming under serious threat from Sharp's plasmacluster positive and negative ions technology.
It is claimed that nearly all harmful airborne particulates like dust, smoke and bacteria etc have a positive charge. The positive charges are continually attracted to the negative charges of the ions until sheer mass makes them sink to the ground. These impurities are simply removed by vacuuming. Detractors of negative ion technology believe that the "overweight" particulates on the ground are not destroyed and that the mere act of walking on them re-contaminates the air.
In addition, there appears to be several methods of producing the negative ions. It is critical to know the various methods as each may have different by-products, some harmful and some which are not. These methods include:
(1) Water method - this employs what is known as the waterfall or Lenard Effect. Water droplets are splashed onto a metal plate where a small electric charge is applied. This simple action results in the splitting of water droplets, causing the production of large numbers of negative ions. It is claimed that no harmful by-products are produced by the water method.
(2) Electron radiation method - this is based on a single negative discharge electrode needle. Applying a high voltage pulse to the electrode results in the production of millions of negatively-charged electrons. It is claimed that this method produces no ozone. This is believed to be due to the application of a "smaller" energy pulse.
(3) Corona discharge method - this is based on a dual electrode model, a sharp metal electrode and a flat electrode. High voltage is applied between the electrodes. This causes the movement of electrons between the electrodes thereby ionising the air in between them. An inherent flaw of this method is the production of harmful by-products like ozone and nitride oxide.
Photocatalytic Oxidation (POC)
This technology is commonly applied in a passive mode. In POC, the powerful reactive agent hydroxyl is also the key to the purifying process.
Germicidal ultraviolet (UV) light is commonly shone on a catalyst (usually titanium oxide) to produce hydroxyl, oxygen and peroxide, all of which are potent oxidising agents that are very effective at destroying the organic structure of micro-organisms and gaseous volatile organic compounds.
Complete and comprehensive action is the pillar of POC technology. Proponents of this technology claim that POC inactivates ALL categories of indoor pollution, including:
(1) airborne particulates i.e. dust, pet dander, plant pollen, sea salts, tobacco smoke, industrial and car pollution, etc
(2) bioaerosols i.e. biological compounds that may be infectious or contagious (e.g. pathogenic bacteria and viruses) or non-infectious and non-contagious (e.g. non-pathogenic bacteria, molds, cell debris)
(3) volatile organic compounds (VOCs) i.e. gaseous chemicals or odours - benzene, styrene, toluene, chloroform, hexane, ethanol, formaldehyde, ethylene, etc, all common emissions from everyday products of our modern home.
Critics of POC zoom in on the power effects of hydroxyl, claiming that they cannot differentiate between the organic structures that make up molecular contaminants and our lung tissue, eye cornea or nose membranes.
Electrostatic Filter
This technology appears to have originated in heavy industries which produced abundant pollutants. The typical electrostatic filter ionic air purifier includes two electrodes sandwiching a porous dielectric material. The dielectric material impedes electrical conductivity whilst the electrodes efficiently conduct electricity.
Impure air is sucked into the electrostatic purifier and passed over the dielectric material which acts like a sieve. The electrostatic field between the electrodes causes airborne particulates i.e.dust, smoke contaminants, etc, to stick to the dielectric surface. Purified air emerges from the other end of the purifier.
Very often, an ion source is inserted before the electrostatic filter to charge the airborne particulates. The impurities, now carrying an electrical charge, stick more effectively to the dielectric material.
Critics of this technology point to the production of harmful ozone in the ionisation process.
Combo Ionic Air Purifiers
To cater to the various adherents and critics of the diverse technologies, combos incorporate all or some of the above types of technologies. Combos may include:
(1) adsorptive materials such as activated carbon or oxygenated charcoal (known for its extremely porous large surface area) are added to POC technology to enhance the removal of VOCs;
(2) oxidizing catalysts like titanium oxide are coated on various components of all types of air purifiers to enhance VOC elimination;
(3) reducing catalysts such as manganese dioxide are coated near the exit outlets of many air purifiers to reduce reactive species like ozone and nitric oxide which may be harmful;
(4) generating ions by differing methods such as using microwave, UV light, radio frequency waves, and direct current;
(5) tweaking the specifications of any ionic air purifier technology so as to attain the well-known HEPA status without actually using HEPA filters.
Obviously, the process of selecting the most efficient and effective ionic air purifier involves analysing a deluge of information. I have barely skimmed the surface of the safety issues of each technology. I will also be studying in greater depth the claims of each technology. It is natural to want to quickly want something that promises to improve the air quality in your homes, offices, factories, schools etc. But I urge you to do your homework and check back here for updates as I continue to look for the ideal ionic air purifier.
To easily receive updates on new articles, subscribe to The Ionic Air Purifier Blog today.